Share You are here : Home > Materials > Basalt Worktops > Masonry / Fabrication Options
 

Illustrative Examples

Worktop edge profiles

Square polished, double chamfer and pencil round are three edge profiles that we offer as standard.

Other options are available such as Ogee etc. Alternative edge profiles will incur additional costs.

 

Square Polished  Double Chamfer  Pencil Round

 

Worktop cut outs

Cut outs for hobs and inset (inserted from above) sinks are simply holes cut into the countertops with the side edges not being polished as they are not visible.

Undermounted sink cut outs are cut to the exact shape of your sink with the exposed sides of the worktop from the cut out polished as the sides are visible.

We can fabricate virtually any cut out shape and size that you require for taps, electrical sockets, waste disposal air switches, pipework etc. 

 

Hob cut out Sink cut out - inset Sink cut out - undermount
 
Cut out for electric socket Cut out for pipework  

 

Worktop drainer grooves

When considering your sink type you may wish to have an undermounted sink with drainer grooves cut into the worktop. This offers a more eye pleasing finish than the drainer sections of most inset sinks.

A set of drainer grooves consists of five grooves. The grooves are tapered towards the direction of the sink to enable the water residue to flow to the sink. If you choose to have two separate sinks of differing sizes it is normal practice to have the drainer grooves on the larger of the sinks. 

 

Drainer grooves

 

Upstands, Splashbacks and window sills

Upstands are fitted at the back of worktops. These make a very practicle and decorative worktop finish. Upstands are generally 100mm in height and are perfect to stop kitchen preparation spillages coming into contact with your walls.

Splashback panels are fitted behind the hob area are offer an area to catch all possible oil spits from your hob area and because they are in one solid single stone piece there are no grout lines to discolour. It is becoming popular to have the entire wall areas are the base units cladded in stone rather than the standard 100mm height of an upstand.

Most kitchen and bathroom sink areas have windows behind them. Your choice of stone as a replacement window sill is a perfect compliment to your room.

 

Upstand Splashback Window cill

 

Rounded corners

A small rounded corner can take the sharpeness off a workop edge which is a good idea as any worktop edge can hurt if you knock into it. A large rounded corner is for a curved base unit. If you simply require the sharpeness taken off the corner of a worktop the radius on this will be as a 10p piece; 10p round. A 10p round is included within the standard worktop price, small and large rounded corner will incur additional fabrication costs. 

 

Rounded corner small Rounded corner large

 

Worktop shapes

We are able to fabricate most shapes into your worktops. The use of shapes can make a stunning focal point for any room

When trying to determine the cost in our online quotation to calculate your price simply enter the longest part of each length and the greatest depath. For example in the case of a break front, where the worktop run is to be fabricated using one piece, simply enter the depth as that of the deepest point.

 

Tell a Friend

 

 
 
Site Map | Login | Privacy Statement | Copyright 2018 Stone Hub Ltd t/a The Worktop Factory